Bringing you the finest cutlery in the world from around the world / Wholesale orders only / No automatic Knife sales in California

CMG O4 MINI TASK LIGHT - BLUE Water Proof ,Permenent 'on' Lever Switch

In stock
Only 2 left
SKU
CMG O4 MINI TASK LIGHT - BLUE/CLEAR
Views: 1
$50.00
The CMG O4 is a super bright keychain light with a futuristic shape, rubber grips, and a simple but effective switching mechanism. The high brightness LED is powered by a single CR2032, and the unit is water-resistant because it has no external switch to leak. The O4 is a good looking light, so you need not be ashamed to carry it around on a zipper, keychain, bag handle, etc. The O4 is ready to go right out of the pack. To get a momentary burst of light, just give it a squeeze. If you wish for it to stay lit continuously, swing the small metal lever on the top of the light downwards so the end of it covers the rubber button. This lever applies enough pressure on the button to light the LED without having to keep squeezing. Swing the lever back to the top position to turn the O4 off. To change the battery, remove the phillips screw from the back of the O4, and use a flatbladed screwdriver to carefully pry the two halves apart. Be careful so you don’t damage the rubber gasket that seals out the weather. Remove the old battery, and insert the new one, button side (-) facing towards the little circular thing with the LED on it. Reassemble by aligning the two flashlight halves and firmly squeezing together; install the screw and tighten gently but firmly.
The CMG O4 is a super bright keychain light with a futuristic shape, rubber grips, and a simple but effective switching mechanism. The high brightness LED is powered by a single CR2032, and the unit is water-resistant because it has no external switch to leak. The O4 is a good looking light, so you need not be ashamed to carry it around on a zipper, keychain, bag handle, etc. The O4 is ready to go right out of the pack. To get a momentary burst of light, just give it a squeeze. If you wish for it to stay lit continuously, swing the small metal lever on the top of the light downwards so the end of it covers the rubber button. This lever applies enough pressure on the button to light the LED without having to keep squeezing. Swing the lever back to the top position to turn the O4 off. To change the battery, remove the phillips screw from the back of the O4, and use a flatbladed screwdriver to carefully pry the two halves apart. Be careful so you don’t damage the rubber gasket that seals out the weather. Remove the old battery, and insert the new one, button side (-) facing towards the little circular thing with the LED on it. Reassemble by aligning the two flashlight halves and firmly squeezing together; install the screw and tighten gently but firmly.
More Information
Weight 1.4500
Brand CMG Lighting Tools
Disclaimer Product colour may slightly vary due to photographic lighting sources or your monitor settings
Write Your Own Review
You're reviewing:CMG O4 MINI TASK LIGHT - BLUE Water Proof ,Permenent 'on' Lever Switch